Hot
Awaiting product image
placeholder

Full Panel with 6mm Bottom Track (Ht.54mm)

Awaiting product image Full Panel with 6mm Bottom Track (Ht.54mm)
Awaiting product image Full Panel with 6mm Bottom Track (Ht.86mm)
0 out of 5
( There are no reviews yet. )

₹444.00

Where is this showing up

Availability: 10 in stock SKU: FPDS54-50-6
  Ask a Question

Description

  • Simplifies construction of drawer as it eliminates the sides of drawers
  • Available with 6mm bottom track, easy to fit and helps in faster assembly, as it does not require screwing the bottom, using 6mm board in place of 9mm or 12mm.
  • Saves wood, labour and drawer space
  • Tilt & remove capability with guiding
  • ‘ Auto-Closing’ of drawer
  • Front facia adjustment
  • Ribbed for strength
  • Precision rollers for smooth running
  • Load capability – 25kgs
  • ‘System 32’ compatible
  • Stopper prevents drawer from falling
  • Available with eccentric cam for facia height adjustment in 86mm and 125mm height Full Panel.

Additional information

Dimensions 50 cm
Brand

Ebco
Finish

IV

Reviews

There are no reviews yet.

Be the first to review “Full Panel with 6mm Bottom Track (Ht.54mm)”

For efficiency and durability.

    • Strictly maintain side gap of 15.5 mm per side.
    • Fix slides parallel and at equal height.
    • Do not apply paint or polish.
  1. Side gap of 15.5 mm per side is required and acts as side panel of drawer. (Refer fig 1).
  2. Clearance of 25.4 mm from top edge of drawer required to tilt and remove drawer. (Refer fig 2).
  3. Fixed slide should be set by 2mm for auto-closing. (Refer fig 2).
  4. Eccentric cam for front facia height adjustment provided in 86 mm and 125 mm height full panels with 6mm bottom track (Refer Fig.3).
  5. Screws should be recessed to avoid fouling.
  6. Fixed slides should be fitted parallel and at equal height to each other.
  7. Front fascia is to be fitted into front brackets which have 2-way adjustment for alignment.

General Inquiries

There are no inquiries yet.